1/3"×3" Rectangular Hole Stainless Steel Welded Mesh
The mesh holes of Stainless Steel Welded Mesh are specified by combining the spacing, in inches or mm, and the wire cross section area in hundredths of square inches or mm. As usually the Stainless Steel Welded Mesh is square opening holes, such as 1/4"×1/4", 1/2"×1/2", 3/4"×3/4", 1"×1" and etc..
This South Korea customer need to buy stainless steel welding wire mesh panels for their factory workshop security fence, we recommend 1/3"×3" rectangular hole stainless steel welded mesh panels for them.
Commodity & Specifications
Commodity Photo and Package
Rated Rectangular Hole Stainless Steel Welded Meshes Specification
For some special applications,customer will require rectangular holes stainless Steel Welded Mesh, we can make the rectangular opening size, wire diameter, mesh roll size and panels size. Before order, consult us.
There are some Rectangular Opening Stainless Steel Welded Mesh specifications that usually in stock or on regular production as following table list.
|Material grade||Mesh size||General Wire Diameter||Roll/Panels Size|
|ASTM 304/316/316L||1×1/2||25.4×12.7||0.8mm,1mm, 1.5mm, 2mm||mesh rolls of
mesh panels of
|ASTM 304/316/316L||1×1.5||25.4×38.1||0.8mm,1mm, 1.5mm, 2mm|
|ASTM 304/316/316L||3/4×1||19×25.4||0.8mm,1mm, 1.5mm, 2mm|
|ASTM 304/316/316L||5/8×1||15.9×25.4||0.8mm,1mm, 1.5mm, 2mm|
|ASTM 304/316/316L||1/2×1||12.7×25.4||0.8mm,1mm, 1.5mm, 2mm|
|ASTM 304/316/316L||1/2×1.5||12.7×38.1||0.8mm,1mm, 1.5mm, 2mm|
|ASTM 304/316/316L||5/12×1||10.6×25.4||0.8mm,1mm, 1.5mm, 2mm|
|ASTM 304/316/316L||1/3×1||8.5×25.4||0.8mm,1mm, 1.5mm, 2mm|
|ASTM 304/316/316L||1/3×1/2||8.5×12.7||0.8mm,1mm, 1.5mm, 2mm|
|ASTM 304/316/316L||1/4×1/2||6.4×12.7||0.8mm,1mm, 1.5mm, 2mm|
|ASTM 304/316/316L||1/4× 3/4||6.4×19||0.6mm,0.8mm,1mm,1.5mm|
|ASTM 304/316/316L||1×2||25.4×50.8||2mm,2.5mm, 3mm,4mm|