Sieving bending wedge wire screen also known as DSM screen, Parabolic screen, curve screen, run down screen, de-watering screen, side hill screen, pressure bend sieves.
The bending wedge wire screen is manufactured by wrapping and welding stainless steel V-shaped profile wire and support rods. Then the panel screens are cutting and curved into common 45°,60° and other degree arcs, and welded a stainless steel frame for easy installation onto equipment.
With continuous slots, the curved bend screen has greater efficient filtering capacity than a flat screen due to forces exerted as material flows against the curved surface.
General Specifications
Material: SUS202, SUS304, SUS316, SUS316L, SUS321, Hartz alloy.
Screen arc angle: 45°, 60°, 120°, 270°,300° and other degrees.
Slot size: ≥20 micron.
Types | Width (mm) | processing m3/h | Slot size (mm) | Radius (mm) | Angle | Size(mm) |
---|---|---|---|---|---|---|
FHS-0920 I | 920 | 50-110 | 0.2-1.0 | 1016 | 45° | 1202*1020*3230 |
FHS-1220 I | 1220 | 70-145 | 0.2-1.0 | 1016 | 45° | 1202*1320*3230 |
FHS-1520 I | 1520 | 85-180 | 0.2-1.0 | 1016 | 45° | 1202*1620*3230 |
FHS-1820 I | 1820 | 105-216 | 0.2-1.0 | 1016 | 45° | 1202*1920*3230 |
FHS-2120 I | 2120 | 122-250 | 0.2-1.0 | 1016 | 45° | 1202*2220*3230 |
FHS-2420 I | 2420 | 140-285 | 0.2-1.0 | 1016 | 45° | 1202*2520*3230 |
FHS-3000 I | 3000 | 175-355 | 0.2-1.0 | 1016 | 45° | 1202*3100*3230 |
FHS-3200 I | 3200 | 190-375 | 0.2-1.0 | 1016 | 45° | 1202*3300*3230 |
FHS-0920 II | 920 | 75-140 | 0.2-1.0 | 1016 | 45° | 1255*1020*3310 |
FHS-1220 II | 1220 | 95-190 | 0.2-1.0 | 1016 | 60° | 1255*1320*3310 |
FHS-1520 II | 1520 | 119-240 | 0.2-1.0 | 1016 | 60° | 1255*1620*3310 |
FHS-1820 II | 1820 | 143-288 | 0.2-1.0 | 1016 | 60° | 1255*1920*3310 |
FHS-2120 II | 2120 | 167-336 | 0.2-1.0 | 1016 | 60° | 1255*2220*3310 |
FHS-2420 II | 2420 | 191-336 | 0.2-1.0 | 1016 | 60° | 1255*2520*3310 |
FHS-3000 II | 3000 | 240-430 | 0.2-1.0 | 1016 | 60° | 1255*3100*3310 |
FHS-3200 II | 3200 | 280-460 | 0.2-1.0 | 1016 | 60° | 1255*3300*3310 |
FHS-0920 III | 920 | 85-180 | 0.2-1.0 | 2032 | 45° | 1580*1020*3715 |
FHS-1220 III | 1220 | 115-240 | 0.2-1.0 | 2032 | 45° | 1580*1320*3715 |
FHS-1520 III | 1520 | 145-300 | 0.2-1.0 | 2032 | 45° | 1580*1620*3715 |
FHS-1820 III | 1820 | 175-360 | 0.2-1.0 | 2032 | 45° | 1580*1920*3715 |
FHS-2120 III | 2120 | 205-420 | 0.2-1.0 | 2032 | 45° | 1580*2220*3715 |
FHS-2420 III | 2420 | 235-480 | 0.2-1.0 | 2032 | 45° | 1580*2520*3715 |
FHS-3000 III | 3000 | 295-600 | 0.2-1.0 | 2032 | 45° | 1580*3100*3715 |
FHS-3200 III | 3200 | 330-650 | 0.2-1.0 | 2032 | 45° | 1580*3300*3715 |
Advantages and Features
Pressure sieving bending wedge wire screen is a kind of very efficient sieve which can effectively improve powder extraction rate and starch quality, and thus has an obvious economic benefit. The advantages and features as follows:
Applications
The wedge wire sieve bends are mainly used for dewatering, sizing and waste water cleanup applications. They can be used in various fields, such as: